I will show you how to maintain a comet 40 series torque converter. Disassemble, remove rust, lubricate, and reassemble. Its easy to clean one. At Precision Industries we pride. The installation manual for your torque converter. Whether or not you have experience with installing a torque converter.

Torque Converter Installation Instructions Important Torque Converter Installation Tips PREPARE THE CRANKSHAFT AND CONVERTER FOR INSTALLATION • always check crankshaft for burrs and out of round • remove rust with emery and lightly grease pocket receiving torque pilot • remove paint from converter crank pilot with emery • pour one quart of ATF into the converter • check the flex plate for cracks and worn teeth • install the converter on front of the transmission CHECK CONVERTER TO FLEX PLATE ALIGNMENT • After bell housing bolts are tight, check free movement of converter. It should have 1/16 to 1/8″ (ON GM ONLY) of clearance between pads on converter and flex plate. Exile Flower Song Download Mp3.

If you have more than 1/16 to 1/8″, install equal thickness washers to reduce clearance to 1/16 to 1/8″ (ON GM ONLY). If not enough clearance, remove transmission and check to see if converter is seated in front pump properly.